Porcelain and Fiberglass Maintenance, Inc. has been refinishing bathtubs, showers, and tile since 1955, and Beverly Hills has been part of our territory for generations — an easy reach from our North Hollywood shop. It is a city that takes its architecture seriously, from the 1920s and ’30s period estates of the Flats to the mid-century and contemporary homes up in the Hills and Trousdale. Those older bathrooms often keep their original tilework and cast iron fixtures, and rather than gut that character out, we restore it — reglazing period tile and refinishing original tubs to a clean, current finish.
The Flats and the older pockets of Beverly Hills are full of homes built in the 1920s and 1930s, and their bathrooms were finished to last — cast iron tubs coated in hard porcelain enamel, paired with the glazed ceramic tile of the era. That original material is a big part of what makes these homes special, which is why so much of it is still in place a century on. When the enamel dulls or the tile glaze wears and dates, refinishing renews the surface without stripping a period bathroom back to studs.
The Hills and Trousdale Estates, developed largely from the mid-1950s onward, lean modern. Their bathrooms more often feature molded fiberglass, acrylic, and engineered surfaces — lighter materials that give slightly under weight and temperature. That flex is why they cannot be prepped the way porcelain is: they call for a primer built to move with the surface, or a fresh finish will not stay bonded.
Across a single Beverly Hills home you may find both an original enamel tub with period tile in one bath and a modern acrylic unit in another. Worn down they can seem similar, but the preparation for each is entirely different — and glazed tile is different again from both. Correctly reading every surface before the first coat is what decides whether a finish lasts for years or lifts within months.
The right decision usually becomes clear before price enters the conversation. In most Beverly Hills bathrooms the tub, shower, tile, or countertop is structurally sound and only the finish has aged — which is exactly where refinishing fits, and where it protects the period character or the clean lines that give the home its value. Here are the five questions homeowners here ask most.
Almost always, and the reason is what a replacement actually entails. Swapping a fixture is never just the new piece — it is demolition, disposal, plumbing rework when the replacement does not align, new tile and drywall, and paint to close the job. In a period home, that demolition can also mean losing original tilework that cannot be matched. Refinishing avoids all of it, restoring what is already there in a single visit at a fraction of a replacement’s cost.
Rarely. Age is not the barrier — condition is. Staining, dullness, chips, surface rust, worn tile glaze, and even an old failing coating are all surface issues that refinishing corrects. What it cannot fix is structural failure: a tub cracked through, an active leak, or a base gone soft from water beneath it. A sound period tub and its tile, simply dated or dull, are ideal candidates; anything failing below the surface we will flag honestly before recommending a path.
For a period or quality fixture, we would advise against it. A liner is a molded shell set over the existing tub rather than a finish bonded to it, so it hides the original surface instead of restoring it — covering the very craftsmanship worth keeping. It also traps whatever is underneath, and water that seeps behind a liner cannot drain, which is how mold and rot begin. Refinishing bonds directly to the tub, leaving no gap, no trapped moisture, and no hollow flex underfoot.
Yes — porcelain, fiberglass, acrylic, and glazed ceramic tile are all part of what we do, which matters in a city with this range of homes. Porcelain enamel has to be chemically etched so a finish can grip its hard face; fiberglass and acrylic need a flexible primer that moves with the material; and tile calls for its own prep and grout treatment. Using one approach across all of them is the leading cause of early failure, so we match the method to each surface, every time.
Very quickly. A standard refinishing is done in one visit, and the surface is cured and ready for normal use about a day later — no crews returning across a week. A replacement, by contrast, keeps a bathroom out of service for several days once demolition, plumbing, and tile work are counted in. For a household that would rather not lose a bathroom to a drawn-out project, that fast, contained turnaround is usually what decides it.
The oldest name in bathtub refinishing in America
Written endorsements from both Kohler and American Standard
A BuildZoom score of 96, in California’s top 20% of licensed contractors
Fully licensed, insured, and bonded
Owned and operated by the same family for three generations
Read more real, signed reviews on our Testimonials page.
A tired, chipped, or discolored tub refinished to a fresh, glossy surface in a single visit.
A dated shower — tile, fiberglass, or combination — renewed in place, with no tear-out.
A chipped or stained bath or kitchen sink brought back, often alongside other work.
Laminate, tile, or stone countertops refinished to a smooth, uniform finish.
Original or dated tile reglazed and grout resealed — every tile stays put.
A low, walk-in entry cut into an existing tub for easier, safer access in a day.
A stone-look speckled finish for counters and sinks, without natural-stone cost.
Several worn surfaces renewed together in a single coordinated visit.
Serving Beverly Hills from our North Hollywood shop, and homes across all of Los Angeles County.